Engineering Graphics 2018 Question Paper — Government College of Engi…
The 2018 Engineering Graphics previous year question paper (Government College of Engineering and Technology, Jammu), with every question and its marks.
- University: Government College of Engineering and Technology, Jammu
- Subject: Engineering Graphics
- Course: Engineering Graphics
- Year: 2018
- Paper: end-term
- Duration: 180 minutes
- Total marks: 100
Instructions
- Attempt any five questions selecting at least one question from each unit.
- All question carry equal marks.
Questions
UNIT - 1
- Q1. (a)(i) Write the following in single stroke inclined letters taking height 28mm using ratio 7:4: "TIME AND TIDES WAITS FOR NONE" (ii) A point M 35mm below HP and 50mm behind VP, draw its projections. (b) A straight line AB, 66mm long makes an angle of $30^{\circ}$ to the H.P. and $45^{\circ}$ to the V.P. The end A is 12mm in front of V.P. and 15mm above H.P. Draw projections of the line.
- Q2. A regular pentagon of 30mm side resting on one of its edges in HP which is inclined at $45^{\circ}$ to VP. Its surface is inclined at $30^{\circ}$ to HP. Draw its Projections.
UNIT - 2
- Q3. A Hexagonal pyramid of base side 30mm, height 70mm is having its base inclined at $60^{\circ}$ to HP such that its base edge perpendicular to VP. Draw its projections.
UNIT - 3
- Q4. A cone of base diameter 70mm and height 80mm is lying on its generator with axis parallel to VP. It is cut by an inclined plane passing through the centre of its axis and also passing through the base of generator on HP. Draw the projections of the cut solid. Apex side part of solid is kept and other upper side part is removed. Also find the inclination of the cutting plane.
- Q5. A square prism of edges 30mm long, axis horizontal, penetrates a vertical cone 80mm diameter of base, axis 80mm long, standing on its base on HP. The Axes intersects each other at right angles. The side faces of the prism are equally inclined to HP. The axis of the prism is 30mm above HP. Draw the front view and top view of the intersecting solids, showing the curves of intersection in each view, when the axis of the prism is parallel to HP and VP.
- Q6. A square Pyramid, side of base 30mm and height 55mm, is resting on its base on HP, with and edge of the base making an angle of $30^{\circ}$ with VP. It is cut by an AIP inclined at $30^{\circ}$ to HP. And passing through a point 25mm from apex on the axis, Draw the views and develop the lateral surface of the pyramid.
UNIT - 4
- Q7. A right regular hexagonal prism, edge of base 20mm height 50 mm, has a circular hole of 20mm diameter drilled centrally through it, along its axis. Draw its isometric projection.
- Q8. Draw the elevation and plan of the given figure:
Related pages
Other years
- Engineering Graphics 2022 question paper — end-term
- Engineering Graphics 2022 question paper — end-term
- Engineering Graphics 2022 question paper — end-term
- Engineering Graphics 2022 question paper — end-term
- Engineering Graphics 2018 question paper — end-term
- Engineering Graphics 2018 question paper — end-term
- Engineering Graphics 2018 question paper — end-term
- Engineering Graphics 2018 question paper — end-term
- Engineering Graphics 2018 question paper — end-term