Development of Solids — Study Resources & PYQs
Development of solid surfaces and hollow sections.
- Estimated study time: 30 minutes
Study resources
- Tikle's Academy - Section of Solid & Development (playlist) (Video) — Combined series on sectioning of solids and development of surfaces with step-by-step solved problems.
- NPTEL Notes - Development of Surfaces: Truncated Solids (Article) — Shows how the development of a cut/truncated solid is built up from its basic development pattern.
- NPTEL — Introduction to Engineering Drawing, IIT Guwahati (Article) — NPTEL engineering-drawing course covering lettering, dimensioning, scales, projections, sections and development of surfaces.
- Autodesk — AutoCAD Learning (Article) — Autodesk learning resources for CAD drafting, geometry, projection, dimensioning and drawing workflows.
Development of Solids previous year questions
- A Pentagonal prism of side of base 20 mm and height 50 mm stands vertically on its base with a rectangular face perpendicular to V.P. A cutting plane perpendic…
- A hexagonal prism of side of base 30 mm and axis 70 mm long is resting on its base on HP. such that a rectangular face is parallel to VP. It is cut by a sectio…
- A right regular pentagonal prism, edge of base 20 mm and height 50 mm, rests on its base with one of its base edges perpendicular to VP. An AIP inclined to HP…
- A square Pyramid, side of base 30mm and height 55mm, is resting on its base on HP, with and edge of the base making an angle of $30^{\circ}$ with VP. It is cut…
- A right cylinder of 30 mm diameter and 35 mm height of axis, is cut by a section plane inclined at 30° to the HP and passes 18 mm from base along the axis. Dra…
- A cylinder of diameter of base 40 mm and height 50 mm is standing on its base on HP. A cutting plane inclined at $45^0$ to the axis of the cylinder passes thro…
- A right rectangular pyramid of base 50 mm x 35 mm and height 70 mm rests on its base in the HP with one of its base sides parallel to VP. A section plane, perp…
Taught in these subjects
- ENGINEERING GRAPHICS WITH CAD — BMET12 · Government College of Engineering and Technology, Jammu
- ENGINEERING GRAPHICS WITH CAD — BMET12 · Government College of Engineering and Technology, Jammu
- Engineering Drawing with CAD — BMET21 · Government College of Engineering and Technology, Jammu
- Engineering Graphics — MET5102 · Government College of Engineering and Technology, Jammu
- Engineering Drawing — MET5202 · Government College of Engineering and Technology, Jammu