Subject 2014 Question Paper — Government College of Engineering and T…
The 2014 Subject previous year question paper (Government College of Engineering and Technology, Jammu), with every question and its marks.
- University: Government College of Engineering and Technology, Jammu
- Course: Building Drawing
- Branch: CIVIL ENGG.
- Year: 2014
- Paper: end-term
- Duration: 180 minutes
- Total marks: 100
Instructions
- Q. No 1 is compulsory.
- Rest attempt Three questions from Section B.
- Use of calculator is allowed.
Questions
SECTION - A
- Q1. Draw plan, elevation, suitable section of a middle school having the following accommodation: Class rooms....... 8 No. Staff Room ........ 1 No. Library Room........ 1 No. Store Room ....... 1 No. Assembly hall ......... 1 No. Principal Office ....... 1 No. Passage, Verandah, Stairs, Wash Rooms separately for male and female students also need to be provided with suitable dimensions. [55 marks]
SECTION - B
- Q2. Draw front elevation, sectional plan and section side view of a Flush door for a Living Room. [15 marks]
- Q3. Draw the L section, cross section and bottom reinforcement plan of a R. C. C. beam with the following data: Size of beam = 230 mm x 400 mm. Main reinforcement = 4 Nos 16 mm dia bars. Stirrups 8 mm @ 2 legged stirrups at 120 mm centre to centre. Effective span = 3.6 m and bearing on the brick wall 230 mm is 100 mm. Assume additional data required, if any. [15 marks]
- Q4. Draw to a suitable scale sectional plan and sectional front elevation of a RCC square column 45 cm x 45 cm resting on a square footing 300 cm x 300 cm, having clear height of 3.0 m. a) Lean concrete base = 3.5 m x 3.5 m x 30 cm thick b) Main reinforcement in column = 8 No. 20 mm dia bars with 8 mm dia ties @ 20 cm c/c c) Reinforcement in footing = 12 mm dia bars @ 12 cm c/c both ways d) Plinth height = 60 cm [15 marks]
- Q5. Draw the plan and section of an open well staircase for Civil Engg. block of an Engineering college, assuming suitable data and indicating all the terminology used in the design of staircase. [15 marks]
- Q6. Make a neat drawing of the joint at the junctions of the principal rafter and the tie beam of a wooden king post truss from the following data: a) Principal Rafter 15 cm x 12 cm. b) Common rafter 8 cm x 5 cm. c) Tie beam 10 cm x 10 cm. d) Thickness of wall 50 cm. e) Bed block of cement concrete 1:2:4=15cm×12cm×55 cm. f) Wall plate = 10 cm x 8.5 cm. Assume additional data required, if any. [15 marks]