Draw the shear force and bending moment diagrams for the loaded overh…
Previous year question for MECHANICS OF SOLIDS.
Question
Draw the shear force and bending moment diagrams for the loaded overhanging beam shown in figure. Also determine the point of contraflexure.
- Year: 2018
- Subject: MECHANICS OF SOLIDS
Related pages
More PYQs on Shear force and bending moment diagrams for statically determinate beams subjected to points load, uniformly distributed loads, uniformly varying loads, couple and their combinations
- A cantilever of length $2\text{ m}$ carries a uniformly distributed load of $2\text{ kN/m}$ length over the whole length and a point load of $3\text{ kN}$ at t…
- For the beam ABCD shown: A beam ABCD, $4\text{ m}$ long is overhanged by $1\text{ m}$ and carries load as shown. Draw the shear force and bending moment diagra…
- A beam AB 10 m long carries a uniformly distributed load of $20\text{ kN/m}$ over its entire length together with the concentrated load of $50\text{ kN}$ at th…
- A bronze bar is fastened between a steel bar and an aluminum bar as shown in Fig.1. Axial loads are applied at the positions indicated. Find the largest value…
- A steel rod $20\text{ mm}$ diameter passes centrally through a copper tube of $25\text{ mm}$ internal diameter and $35\text{ mm}$ external diameter. Copper tub…
- Two close coiled helical springs wound from the same wire, but with different core radii having equal number of coils are compressed between rigid plates at th…
- Derive the expression for the direct strain on an oblique plane due to two normal pulls and a shear force.
- Two close coiled helical springs wound from the same wire, but different core radii having equal number of turns are compressed between rigid plates at their e…